Passenger hoist gearbox

A.The features of gear motor gear box for Construction Hoists

1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.

Notice

 

It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil (or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.

We are gear box manufacturer in china .our main products like construction Hoist Gearbox or speed reducer  :16: 1, 12: 1, 10: 1  ,30hp gearbox ,speed reducer.

 

 

B.notice of installation of cheap gearbox prices for lifting machinery, worm gearbox :

1 The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.

2 The connecting shaft of prime mover, reducer and operation device must be coaxial installation.

3The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.

4.Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.

5. While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.

6. When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.

 

C. notice of usage of cheap gearbox prices for lifting machinery, worm gearbox :

1.Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.

2. According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.

 

Overview
Model NO.: 16: 1
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Hardness: Hardened Tooth Surface
Rated Power: 10-19kw
Power Source: Electric
Transport Package: Carton
Origin: China
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Layout: Three-Ring
Installation: Torque Arm Type
Type: Worm and Gear
Ratio: 10, 12, 14, 16, 25
Gearing Arrangement: Worm
Trademark: CPTC
Specification: 11kw, 15kw
HS Code: 8431390000
Reducer between the prime mover and the working machine or the actuator from the effect of matching the speed and transfer torque , speed reducer is a relatively sophisticated machinery , using its purpose is to reduce the speed and increase torque . Reducer is enclosed in a rigid shell made of gears , worm gear , gear - worm gear consisting of independent components , commonly used as a prime mover deceleration gear and work machines. Between the prime mover and the implementing agencies to work or play the role of matching the speed and torque transfer in modern machinery wide range of applications .